Hello,...i have a 95' Jetta,..rear speakers never worked so i pulled radio out and looked for problem. Couldn't find anything wrong,..so i put back together. I have the code for the radio,...but i forgot the process. I did it about a year ago,..but i've forgotten the process of what buttons too hit. On radio now it just says "SAFE". Anyone happen too know? Its a Volkswagon Clarion Radio,..with cassette. Thanks a milllion.

 

scan and seek at the same time i think

 

Thanks,...i figured it out,..here's how i did it:


1. "SAFE" apperars on the display.
2. Press & hold "MODE" button.
3. Press & hold "SCAN" button.
4. "1000" appears on the display.
5. Release both buttons immediately.
6. There should be a number to the left of the "1000" This should represent how many times you have tried to enter the code.
7. Enter your 3 or 4 digit code with the following. If you have a 3 digit code, assume that the first digit is a zero or blank.
8. Press button 1 until your first digit is changed to the correct number. (zero or blank)
9. Press button 2 until your 2nd digit is correct.
10. Do the same with the 3rd and 4th digit.
11. When the digits are correct, press & hold the "MODE" button.
12. Press & hold the "SCAN" }button.
13. The word "SAFE" should show up again.
14. Release the buttons immediately and your radio should work.