Keyless Entry Programming
#2
RE: Keyless Entry Programming
OK, I figured this out.
Using two keys. I put one key in the ignition and turned it forward until all the lights came on but before the car turned on.
Then, with all doors closed I used the second key to hold the door lock in the unlock position.
Then I held the panic buttin on the remote until the horn chirped 3 times (took about 10 seconds).
This didn't work the first time, but the second time through the remote was programmed.
This should work for most golfs jettas and passats up to '93.
I have the banjo style remote with the following on the back: FCC ID: M36HUO1WT
Using two keys. I put one key in the ignition and turned it forward until all the lights came on but before the car turned on.
Then, with all doors closed I used the second key to hold the door lock in the unlock position.
Then I held the panic buttin on the remote until the horn chirped 3 times (took about 10 seconds).
This didn't work the first time, but the second time through the remote was programmed.
This should work for most golfs jettas and passats up to '93.
I have the banjo style remote with the following on the back: FCC ID: M36HUO1WT
Thread
Thread Starter
Forum
Replies
Last Post
awl
Private 'Wanted' Classifieds
0
06-26-2007 10:34 AM