hi guys maybe someone here can help me! i hope soo!
ok heres whats going on i have a 1998 Volkswagen Beetle & i have the factory radio on it and its asking me for the code, i have all of that.
Ive read on here the steps on how to do it! But i dont understand after i put in the code...
I hold down the foward seek button and it beeps and it gets the signal then it goes off and says "safe 1"

I dont get what else to do!
I guess im going to have to go to the dealer.. ):
am i missing any steps or anything?!
i dont know ): i hope someone can help me out please let me know anyone! please!! thanks!! guys!

 

here's how i did it:


1. "SAFE" apperars on the display.
2. Press & hold "MODE" button.
3. Press & hold "SCAN" button.
4. "1000" appears on the display.
5. Release both buttons immediately.
6. There should be a number to the left of the "1000" This should represent how many times you have tried to enter the code.
7. Enter your 3 or 4 digit code with the following. If you have a 3 digit code, assume that the first digit is a zero or blank.
8. Press button 1 until your first digit is changed to the correct number. (zero or blank)
9. Press button 2 until your 2nd digit is correct.
10. Do the same with the 3rd and 4th digit.
11. When the digits are correct, press & hold the "MODE" button.
12. Press & hold the "SCAN" }button.
13. The word "SAFE" should show up again.
14. Release the buttons immediately and your radio should work