2006 Jetta TDI Ignition question
Thread Starter
|
Junior Member
Joined: Mar 2011
Posts: 9
From: Penticton BC Canada
2006 Jetta TDI Ignition question
I cannot put the key into the ignition.
Tow truck driver said it looked like the ignition had been partially turned.
Any ideas was to what to do or caused the problem
We had driven into a parking lot, left the car there for a couple of hours, and when we came back to the car that was it, key would not go.
I must add that for the past several months, we could not lock all the car doors with the key for.
Tow truck driver said it looked like the ignition had been partially turned.
Any ideas was to what to do or caused the problem
We had driven into a parking lot, left the car there for a couple of hours, and when we came back to the car that was it, key would not go.
I must add that for the past several months, we could not lock all the car doors with the key for.
Super Moderator
Joined: Sep 2009
Posts: 2,648
From: Stoke on Trent, England
Try some WD40 or you need to dismantle the ignition switch.
Ignition switch and lock cylinder removal and repair on VW and Audi | VW TDI forum, Audi, Porsche, and Chevy Cruze diesel forum
Ignition switch and lock cylinder removal and repair on VW and Audi | VW TDI forum, Audi, Porsche, and Chevy Cruze diesel forum
Thread Starter
|
Junior Member
Joined: Mar 2011
Posts: 9
From: Penticton BC Canada
Took my car to the mechanic, he dismantled the switch and a mall piece of green or blue plastic fell out. He reassembled the switch and it now works OK (for the time being).
He ordered a new switch to be installed on May 2nd.
Hope the current switch works OK until them.
Thanks for your response
Ivan.
He ordered a new switch to be installed on May 2nd.
Hope the current switch works OK until them.
Thanks for your response
Ivan.
Thread
Thread Starter
Forum
Replies
Last Post