If so, maybe you can tell me where these wires go and what their function may be. The ones in my hand are either green with 2 white stripes or vice-verse. The other is brown. They both disappear into separate junction plugs. The green and white one looks exactly like the green and white one in the other picture that is coming out of the CSI sending unit.

Thanx,

Mark

 

[quote]ORIGINAL: markadeck

If so, maybe you can tell me where these wires go and what their function may be. The ones in my hand are either green with 2 white stripes or vice-verse. The other is brown. They both disappear into separate junction plugs. The green and white one looks exactly like the green and white one in the other picture that is coming out of the CSI sending unit.

Thanx,

Mark

Mark, If it's any help, the brown is always "GROUND"
Earl

 

[quote]ORIGINAL: blue99bug

Ok, then that one I shall just run to a ground somewhere. The other one I may just jerry-rig into the CSI sending unit. I will think on that one.

 

do thet go down to the warm up regulator

 

I figured these out too. I am obsessed with stuff that does not work right. Those wires I am talking about go to a switch on a stick transmission. When the transmission was removed they were not unplugged first and were just torn loose. One activates the backup lights and the other the upshift arrow. I have them plugged in now, but neither work. The switch must be bad, but I can live without those two items.