Thanks Jrailer. I bought this car with 150000km. I don't know if it's been done.Any way to tell? they say timing belt at 100000km
is this ture?

 

you could take the upper cover off and look
set to TDC and ckeck timing marks

 

Sorry Jrail can you be more specific I do not know what is aTDC
and where is the timing marks location.
thanks

 

top dead center
you shoud take it to a good shop and have them check it for you
shouldnt take to long to do

 

Thanks Jrailer will do will give update.

 

Hay Jrider popped the cover seen tds mark.The belt looks good.I looked at the marking on the pully and it's at 6Oclock with engine off.When i start and turn it off the marking stopped at 4Oclock.
Do they must line up when i turn engine off yes or no.
Thanks

 

no it will stop wherever it wants to
what you need to look at is the cam gear at 12 and the crank gear at 12
the crank will make two full turns for every one full turn of the cam
there is a mark on the pullys that will line up with a mark
the cam gear lines up with a little grove in the back cover the crank pully has a small notch in it that will line up with an arrow on the lower cover
you can also ckeck it on the flywheel but it is easyer to look at the pully

 

going to the shop[] thanks jrailer for your help keep you posted.

 

lol
ya it can get a little bit over some peoples heads

 

Well I went to the doctor he changed the o2 sensor bank1 and also the cam sensor. Doctor also said timing looks ok. Doctor also took my money and said come again and i smiled and said i will come back.So i drove my bug home it ran so smooth without a hickup parked it in driveway thinking how the operation was a success.I went inside after 20min came back out jumped in started my bug and guess what happen the little engine orange light smiled at me. scanned again and the same codes i had before.Need help Jrailer and thanks for your time.