How to program your key fob.
 

If I have to take the second fret for my S60, I have one of Rufe and then my agent must encode car.Im said it was important to a bar code that comes with a key to get because this is what they use the software to get the key to read in cars instead of receiving a signal fromt fob.SO answer is what Im saying the most important representative job ..

How to program your key fob.
 

You have to take the keys to a local dealer that Nissan. They will give you an estimate on how much it costs. Usually expensive, but in some cases they are not. I work in a former page, and many older vehicles are still expensive. The same should be programmed fob SO unless you have installed the system yourself. :)

Although a bit exaggerated, but the feeling is very sincere:cool:

Good, thanks for the reply, so useful

its very good information and thank u so much for your information

Put one key into the ignition and turn it on. Don't start car.
Using the second key lock the car manually outside.
Press unlock once and wait a couple of seconds.
Then press lock once.
Manually unlock the car and remove the key from the ignition.
Now test your key fob.

Well this is good information i was waiting to know this process.

Well this is good information i was waiting to know this process.

ProgramYourRemote.com provides free programming instructions and procedures for automotive keyless entry remote fobs for all makes and models of cars

reply:
 

I just got my car and the dealer didn’t have an extra spare key for me…so he gave me some other VW’s key+FOB and told me to get he key part recut at the VW dealership and to reprogram the FOB part myself to save $$$.