General Tech
Sponsored by:
Sponsored by:

Help

Thread Tools
 
Search this Thread
 
  #1  
Old 08-05-2006, 11:27 PM
goforthme2's Avatar
Thread Starter
Join Date: Aug 2006
Posts: 2
Default Help

Is this the correct place?
Hi, I picked up a speed buggy like kit car with a 71 to 73 vw engine. A 61 to 66 tranny. I found all this out while trying to replace the clutch. I began this task because when taking off at times, the back end would go billistick(heavy bounce). Finnally a few times of that the thro out fell off. Any way, got it all replaced/turned with the correct set up and put back together hoping that the clutch/flywheel was the cuase of the bounce, but it was not. I then jacked the rear end up and started pocking around and found the right wheel could be moved in and out about 3/32" and the left side does not move at all. I have taken it apart up to the wheel bearing and I can not find any visable problems. Any one have any ideas? Is the slop in the wheel the cause of the bounce? How can this be fixed?

Bill
 




All times are GMT -5. The time now is 06:43 PM.