Flywheel removal
 

How do I remove flywheel from 1969 bus engine? Ehgine is out of bus.

Many thanks

RE: Flywheel removal
 

36 mm nut
take off clutch
take off nut
pull off flywheel

RE: Flywheel removal
 

I removed the clutch, locked the flywheel with bolt on devices, used 36mm socket and pull handle and beat the h- out of the pull handle and could not move the nut. I tried the opposite direction and still no movement at all. The locking washer under the nut has never been bent to lock the nut. Can I separate the halves of the case and remove the crankshaft and flywheel? I then could place the crankshaft and flywheel in my lathe ahd cut the nut out of the crankshaft. I think I can buy a new nut for about 14 bucks.

Many thanks,

RE: Flywheel removal
 

you could put a little heat to it