08 Jetta Fault Code
Fault code description: "Control module for seat occupied recognition-] 706" And the state is "sporadic" Anyone have any ideas?
|
Post the fault code number and I will tell you more?
https://volkswagenforum.com/forum/ne...gnature-34185/ |
Originally Posted by Keithuk
(Post 60235)
Post the fault code number and I will tell you more?
https://volkswagenforum.com/forum/ne...gnature-34185/ |
You will need to find someone with VAG-COM\VCDS not the cheap ones of fleabay. VAG Error Code: 02511 Fault Location: Control Module for Seat Occupied Recognition (J706) - No or Incorrect Basic Setting/Adaptation Possible Cause: Function Limitation. Airbag Warning Light active. Basic Setting Not Performed. Possible Solutions: Perform Basic Setting. Special Notes: When found in Audi A3 (8P): Airbag 9.41, perform Basic Setting. When found in Audi A4 (8E): Airbag 9.41, perform Basic Setting. When found in Audi A6 (4F): Airbag, perform Basic Setting. When found in Audi A8 (4E): Airbag, perform Basic Setting. When found in Audi Q7 (4L): Airbag, perform Basic Setting. When found in VW Eos (1F): Airbag perform Basic Setting When found in VW Golf/Jetta/Bora V (1K/5M): Airbag, perform Basic Setting. When found in VW New Beetle/Cabriolet (1C/1Y/9C): Airbag, perform Basic Setting. When found in VW Passat (3C): Airbag, perform Basic Setting. When found in VW Phaeton (3D): Airbag, perform Basic Setting. When found in VW Touareg (7L): Airbag, perform Basic Setting. VAG Error Code: 02511 Fault Location: Control Module for Seat Occupied Recognition (J706) - Defective\Implausible Signal Possible Cause: Function Limitation. Airbag Warning Light active. Wiring/Connector(s) from/to Control Module for Seat Occupied Recognition (J706) faulty. Control Module for Seat Occupied Recognition (J706) faulty. Possible Solutions: Check Wiring/Connector(s) from/to Control Module for Seat Occupied Recognition (J706). Check Measuring Value Blocks (MVB) for Seat Occupation Pressure Sensor (G452). Check/Replace Control Module for Seat Occupied Recognition (J706). Special Notes: en 02511 - Control Module for Seat Occupied Recognition (J706) 014 - Defective is stored in the NAR (North American Region): 2004 -> 2008 New Beetle and New Beetle Convertible (1C/1Y). 2005 -> 2008 Jetta (1K). 2006 -> 2008 Passat and Passat Wagon (3C). 2007 -> 2008 Eos, Gti, Rabbit, and R32 (1K). Please see TSB # 01-08-07 or 2010347. This TSB covers the dealer updating of the PODS module and should be checked or completed prior to replacing the module. As taken from my https://volkswagenforum.com/forum/ge...oftware-34973/ |
Originally Posted by Keithuk
(Post 60245)
You will need to find someone with VAG-COM\VCDS not the cheap ones of fleabay. VAG Error Code: 02511 Fault Location: Control Module for Seat Occupied Recognition (J706) - No or Incorrect Basic Setting/Adaptation Possible Cause: Function Limitation. Airbag Warning Light active. Basic Setting Not Performed. Possible Solutions: Perform Basic Setting. Special Notes: When found in Audi A3 (8P): Airbag 9.41, perform Basic Setting. When found in Audi A4 (8E): Airbag 9.41, perform Basic Setting. When found in Audi A6 (4F): Airbag, perform Basic Setting. When found in Audi A8 (4E): Airbag, perform Basic Setting. When found in Audi Q7 (4L): Airbag, perform Basic Setting. When found in VW Eos (1F): Airbag perform Basic Setting When found in VW Golf/Jetta/Bora V (1K/5M): Airbag, perform Basic Setting. When found in VW New Beetle/Cabriolet (1C/1Y/9C): Airbag, perform Basic Setting. When found in VW Passat (3C): Airbag, perform Basic Setting. When found in VW Phaeton (3D): Airbag, perform Basic Setting. When found in VW Touareg (7L): Airbag, perform Basic Setting. VAG Error Code: 02511 Fault Location: Control Module for Seat Occupied Recognition (J706) - Defective\Implausible Signal Possible Cause: Function Limitation. Airbag Warning Light active. Wiring/Connector(s) from/to Control Module for Seat Occupied Recognition (J706) faulty. Control Module for Seat Occupied Recognition (J706) faulty. Possible Solutions: Check Wiring/Connector(s) from/to Control Module for Seat Occupied Recognition (J706). Check Measuring Value Blocks (MVB) for Seat Occupation Pressure Sensor (G452). Check/Replace Control Module for Seat Occupied Recognition (J706). Special Notes: en 02511 - Control Module for Seat Occupied Recognition (J706) 014 - Defective is stored in the NAR (North American Region): 2004 -> 2008 New Beetle and New Beetle Convertible (1C/1Y). 2005 -> 2008 Jetta (1K). 2006 -> 2008 Passat and Passat Wagon (3C). 2007 -> 2008 Eos, Gti, Rabbit, and R32 (1K). Please see TSB # 01-08-07 or 2010347. This TSB covers the dealer updating of the PODS module and should be checked or completed prior to replacing the module. As taken from my https://volkswagenforum.com/forum/ge...oftware-34973/ |
All times are GMT -5. The time now is 03:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands