P011 code, on GOLF 5 Gti.
 

Hi, i have a golf 5 gti 2005. The check engine light came on and I scanned with an obd2 and the code was p011 - Camshaft Position A - Timing Over-Advanced or System Performance (Bank 1).

I changed the oil, bought new vvt solenoid, i Also tested the wires.
I clear the codes had a ride and the check light came on. The code was again p011. Is there any chance the timing chain has jumped? Did anyone have the same problem? Any advice will be appreciated.

First posts normally go in introductions else you could get a free fix and we never see you again!!!

Default Welcome to Volkswagen Forum - Rules & Recommendations

P011 what was that scanned with there is a number missing?

I am sorry i am new to this forum, and i am not good at english also. The code is p0011

EOBD II Error Code: P0011

Fault Location:
Camshaft A (Intake) Left/Front, Bank 1 - Retard Setpoint not Reached (Over-Advanced)

Possible Cause:
Malfunction Indicator Lamp (MIL)(K83) active.
Power Loss.

Intake Camshaft Timing Adjustment Valve 1 (N205) faulty.
Fuel Pump Relay (J17) faulty.
Mechanical Timing not correct, including Chain and/or Belt timing.

Possible Solutions:
Check Intake Camshaft Timing Adjustment Valve 1 (N205).
Check Fuel Pump Relay (J17).
Check Mechanical Timing.
Difference between target and actual > 8° CRK and adjustment angle < 2.5° CRK.

Special Notes:
When found in Engine: 4.0l W8.
Check Technical Product Information (TPI) 2010059 Rest of World (RoW).
Check/Replace Oil Sieve in Timing Case (Camshaft Adjuster).
When found in 2008 and newer VW 2.0T engine with a timing chain (example; CCTA and CBFA), please see:
TT 01-15-08 for information about the intake camshaft, adjuster bridge and spool valve.

As taken from my new EOBD II Fault Codes Software