O2 Codes 97 2.0 jetta
#1
O2 Codes 97 2.0 jetta
Hi,
Thanks for having me here!
I have been a long time VW driver, I have own several of them.
Scirocco, Rabbit, Fox, and now a Jetta all of them I have owned 2nd hand and every single one of them except for the Rabbit have given me electrical problems.
Here is whats going on with the Jetta
I took it to someone on a recommendation from a friend whom I thought was a mechanic, and not a parts re placer to take a look at the check engine light problem.
He replaced both sensors.
I drive it 7 miles or so and the light comes back on, with the same codes!
P 0137 Oxygen O2 Sensor Circuit
Low Voltage (Bank 1, Sensor 1)
p 0137 Oxygen O2 Sensor Circuit
Low Voltage (Bank 1, Sensor 2)
Now he wants me to bring it somewhere else.
What happen?
What is the possible solutions?
Thanks for having me here!
I have been a long time VW driver, I have own several of them.
Scirocco, Rabbit, Fox, and now a Jetta all of them I have owned 2nd hand and every single one of them except for the Rabbit have given me electrical problems.
Here is whats going on with the Jetta
I took it to someone on a recommendation from a friend whom I thought was a mechanic, and not a parts re placer to take a look at the check engine light problem.
He replaced both sensors.
I drive it 7 miles or so and the light comes back on, with the same codes!
P 0137 Oxygen O2 Sensor Circuit
Low Voltage (Bank 1, Sensor 1)
p 0137 Oxygen O2 Sensor Circuit
Low Voltage (Bank 1, Sensor 2)
Now he wants me to bring it somewhere else.
What happen?
What is the possible solutions?
#2
Sorry this is an old thread but I've just noticed it while searching for something else.
EOBD II Error Code: P0137
Fault Location:
Heated oxygen sensor (HO2S)/Oxygen sensor (O2S) 2 (G39), bank 1 - low voltage
Possible Cause:
Malfunction indicator lamp (MIL) Triggered on second occurrence.
Exhaust leak.
Wiring short to earth.
Oxygen sensor (O2S).
Engine control module (ECM).
As taken from my Free EOBD II Error Codes software
EOBD II Error Code: P0137
Fault Location:
Heated oxygen sensor (HO2S)/Oxygen sensor (O2S) 2 (G39), bank 1 - low voltage
Possible Cause:
Malfunction indicator lamp (MIL) Triggered on second occurrence.
Exhaust leak.
Wiring short to earth.
Oxygen sensor (O2S).
Engine control module (ECM).
As taken from my Free EOBD II Error Codes software
Thread
Thread Starter
Forum
Replies
Last Post