Codes
#2
An error code with out description isn't much use.
You need to get your motor scanned (preferably with VAG-COM\VCDS) for any error codes logged in the ecu and post them, that will save a lot of guessing.
The closest code that I have is:
Fault Location:
Sensor for Vent Temperature: Centre (G191) - Open Circuit/Short Circuit to Earth/Short Circuit to Positive
Possible Cause:
Fuse(s).
Wiring/Connector(s).
Sensor for Vent Temperature: Centre (G191).
Possible Solutions:
Check/Replace Fuse(s).
Check/Replace all faulty Wiring/Connector(s).
Read Measuring Value Blocks (MVB).
As taken from my new https://volkswagenforum.com/forum/ge...oftware-34973/
You need to get your motor scanned (preferably with VAG-COM\VCDS) for any error codes logged in the ecu and post them, that will save a lot of guessing.
The closest code that I have is:
VAG Error Code: 01296
Fault Location:
Sensor for Vent Temperature: Centre (G191) - Open Circuit/Short Circuit to Earth/Short Circuit to Positive
Possible Cause:
Fuse(s).
Wiring/Connector(s).
Sensor for Vent Temperature: Centre (G191).
Possible Solutions:
Check/Replace Fuse(s).
Check/Replace all faulty Wiring/Connector(s).
Read Measuring Value Blocks (MVB).
As taken from my new https://volkswagenforum.com/forum/ge...oftware-34973/
Thread
Thread Starter
Forum
Replies
Last Post